AMS 4954 Ti6Al4V Titanium Alloy Welding Wire

AMS 4954 Ti6Al4V Titanium Alloy Welding Wire,
AMS 4954 Ti6Al4V Titanium Alloy Welding Wire,

Stainless Steel Coiled Tubing Specifications

Standard: ASTM A269/A249 Standard

Grade: TP304, TP316L 304 316 310S 2205 825 625

Product Name: SS304 Coiled Tube, SS316 Coiled Tube, Duplex Coiled Tube, Monel 400 Coiled Tube, Hastelloy Coiled Tube, Inconel Coiled Tube, 904L Coiled Tube, Seamless Coiled Tube, Welded Coiled Tube

Outer diameter: 6.52-19.05mm

Think: 0.2-2MM

Tolerance: OD±0.1mm, wall thickness: ±10%, length: ±5mm

Length: 300-3500M/roll

Packing: iron pallet, wooden pallet, polyethylene bag

Applications: refrigeration equipment, evaporators, gas-liquid conveying, condensers, beverage machines

Condition: Soft/semi-hard/soft bright annealed

Specifications: outer diameter 6.52mm-20mm, wall thickness: 0.40mm-1.5mm

Tolerance Range: Diameter: +0.1mm, Wall Thickness: +10%, Length: -0/+6mm

Length: 800-3500M or according to customer requirements.

Product advantages: fine surface polishing, uniform wall thickness, high tolerance accuracy.

Common sizes of stainless steel coils: we can produce according to your requirements.

Grade 304 is the standard “18/8″ stainless steel; it is the most versatile and widely used stainless steel available in a wider range of products, forms and finishes than any other. It has excellent forming and welding characteristics. The balanced austenitic structure of grade 304 enables deep drawing without intermediate annealing, which makes this grade dominant in the manufacture of drawn stainless steel parts such as sinks, hollowware, and pans. For these applications, a special “304DDQ” (Depth Drawing Quality) variant is usually used. Grade 304 is easily braked or rolled into a variety of components for industrial, construction and transportation applications. Grade 304 also has excellent welding characteristics. Post-weld annealing is not required when welding thin sections.

Grade 304L is a low carbon version of 304 that does not require post weld annealing and is therefore widely used for heavy duty components (about 6mm+). The higher carbon grade 304H can be used at high temperatures. The austenitic structure also gives these grades excellent toughness, even at low temperatures.

Stainless steel coiled tubes/coil tubing common size range

AMS 4954 Titanium Alloy, Welding Wire 6Al – 4V (Composition similar to R56400)

1.1 Form:

This specification covers a titanium alloy in the form of welding wire.

1.2 Application:

This wire has been used typically as filler metal for gas-metal-arc and gas-tungsten-arc welding of titanium alloys, but usage is not limited to such applications.

3.1 Wire Composition:

Shall conform to the percentages by weight shown in Table 1; oxygen shall be determined in accordance with ASTM E1409, hydrogen in accordance with ASTM E1447, and other elements by wet chemical methods in accordance with ASTM E 120, by spectrochemical methods, or by other analytical methods acceptable to the purchaser.

image

3.3 Condition:

Cold drawn, bright finish, in a temper and with a surface finish which will provide proper feeding of the wire in machine welding equipment.

3.5 Properties:

Wire shall conform to the following requirements:

3.5.1 Weldability: Melted wire shall flow smoothly and evenly during welding and shall produce acceptable welds. ARP1876 may be used to resolve disputes.

3.5.2 Spooled Wire: Shall conform to 3.5.2.1 and 3.5.2.2.

3.5.2.1 Cast: Wire, wound on standard 12-inch (305-mm) diameter spools, shall have imparted to it a curvature such that a specimen sufficient in length to form one loop with a 1-inch (25-mm) overlap, when cut from the spool and laid on a flat surface, shall form a circle 15 to 50 inches (381 to 1270 mm) in diameter.

3.5.2.2 Helix: The specimen on which cast was determined, when laid on a flat surface and measured between adjacent turns, shall show a vertical separation not greater than 1 inch (25 mm).

3.7 Sizes and Tolerances:

Wire shall be supplied in the sizes and to the tolerances shown in 3.7.1 and 3.7.2.

3.7.1 Diameter: Shall be as shown in Table 2.

image

3.7.2 Length: Cut lengths shall be furnished in 18, 27, or 36 inch (457,686, or 914mm) lengths, as ordered, and shall not vary more than +0, -1/2 inch (-12.7 mm) from the length ordered.

Hot Tags: ams 4954 ti6al4v titanium alloy welding wire, China, manufacturers, suppliers, factory, company, exporter, seller, brands, import, buy, best, high-quality